- Home
- Products
- About Us
- Cases
- Resources
- Solution
- News
- Contact
- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
 |
CCH-H150
110/220V,50/60Hz
150L/h
150KG
620*450*1600
2-10μs/cm
18.2MOhm-cm
| Quantity: | |
|---|---|
Type I Water Purification System Laboratory Ultra Pure Water Deionized Water
Laboratory ultrapure water machine is a kind of laboratory water purification equipment. It is a water treatment device that removes all solid impurities, salt ions, bacteria and viruses in water through filtration, reverse osmosis, electrodialysis, ion exchanger, ultraviolet sterilization and other methods.
Laboratory ultrapure water equipment is widely used in medicine, electronics, chemical industry, biological physical and chemical laboratory and other industries.
Using advanced reverse osmosis technology and ultra-purification column with original formula filler..This series of machine with tap water as water, at the same time, the preparation of 18.2 MΩ∙cm ultrapure water and RO pure water, ultrapure water reach or exceed the quality standards of China laboratory water and test methods(GB6682-2008)and ASTM, CLSI, ISO3696 level of water quality standards. This system is compact and easy to operate.
Product Characteristics
1. It has a complete purification unit to realize tap water as influent water, pure water and ultrapure water as effluent. Produce different standards of water to meet the water needs of various laboratories.
2. If the raw water quality is less than 2000μs and the hardness is ppm450ppm, in this case, the water quality of the produced water can be stabilized below 5μs/cm, and the raw water utilization rate can reach 60%-80%.
3. Double outlet water, can output UP water and RO water at the same time.
4. Automatic timing flushing, automatic protection against water shortage.
5. Automatic start-up when taking water, automatic stop without water, saving electricity, convenient maintenance, completely replacing traditional distilled water device.
Application
Any place that does analytical testing may need this unit.Not every lab will need type I water, but some of the industries that do need it are again colleges and universities, research labs, food and beverage, concrete plants, and oil refineries.This unit can be used for are:
Ion Chromatography (IC)
Mass Spectrometry
Atomic Absorption
Inductively Coupled Plasma Spectroscopy (ICP)
Solid Phase Extraction
Electrochemistry
Glassware Washing
Sample dilution & reagent prep
Water analysis
Type I Water Purification System Laboratory Ultra Pure Water Deionized Water
Laboratory ultrapure water machine is a kind of laboratory water purification equipment. It is a water treatment device that removes all solid impurities, salt ions, bacteria and viruses in water through filtration, reverse osmosis, electrodialysis, ion exchanger, ultraviolet sterilization and other methods.
Laboratory ultrapure water equipment is widely used in medicine, electronics, chemical industry, biological physical and chemical laboratory and other industries.
Using advanced reverse osmosis technology and ultra-purification column with original formula filler..This series of machine with tap water as water, at the same time, the preparation of 18.2 MΩ∙cm ultrapure water and RO pure water, ultrapure water reach or exceed the quality standards of China laboratory water and test methods(GB6682-2008)and ASTM, CLSI, ISO3696 level of water quality standards. This system is compact and easy to operate.
Product Characteristics
1. It has a complete purification unit to realize tap water as influent water, pure water and ultrapure water as effluent. Produce different standards of water to meet the water needs of various laboratories.
2. If the raw water quality is less than 2000μs and the hardness is ppm450ppm, in this case, the water quality of the produced water can be stabilized below 5μs/cm, and the raw water utilization rate can reach 60%-80%.
3. Double outlet water, can output UP water and RO water at the same time.
4. Automatic timing flushing, automatic protection against water shortage.
5. Automatic start-up when taking water, automatic stop without water, saving electricity, convenient maintenance, completely replacing traditional distilled water device.
Application
Any place that does analytical testing may need this unit.Not every lab will need type I water, but some of the industries that do need it are again colleges and universities, research labs, food and beverage, concrete plants, and oil refineries.This unit can be used for are:
Ion Chromatography (IC)
Mass Spectrometry
Atomic Absorption
Inductively Coupled Plasma Spectroscopy (ICP)
Solid Phase Extraction
Electrochemistry
Glassware Washing
Sample dilution & reagent prep
Water analysis
