Lab Water Purification Machine Chromatography and PCR Testing Ultra Pure Water
This reverse osmosis water purification system which uses the technology of reverse osmosis and polishing resin to purify the dissolved salt and particlar from feed water and make the oulet water ultra pure water (Deionized water).
The ultra pure water (DI water) is usually used for laboratory test .
Product Features
1. Microprocessor operation and control,real-time quality monitoring and intuitive screen with pressure and conductivity.
2. The machine has protection procedures for equipment with too long continuous water making time.
3. Auto self-flushing of RO membrane function, extend RO membrane′s life.
4. Multiple alarm function: full water,no feed water, water quality′s standard exceeding,etc.
5. Imported top polishing resin, ensure ultrapure water′s quality up to 18.2 MΩ.cm, with the lowest TOC level.
6. Automatic shutdown when the water tank is full, ultra-low pressure protection, RO membrane automatic flushing and other functions.
7.The equipment meets the requirements of supporting biochemical instruments , other laboratory analysis water and medical experiment water.
Scope of Application
1. Inspection and Analysis, Reagent Preparation, Microbial Culture, Container Cleaning, etc. Through the addition device, it can be applied to clinical immunity, enzyme labeling test and so on.
2. Inspection Water, fully supporting the use of various brands of automatic biochemical instruments: Olympus, Beckman, KHB, Mindray, Roche, Toshiba, Rayto, Dirui, etc.
Model | CCH-H10 | CCH-H20 |
Output | 10L/h | 20L/h |
Water Tank Capacity | 3G | 3G |
Feed water requirement | Tap water, temperature 10~35℃,pressure:0.15-0.35Mpa; TDS:≤200mg/L | |
RO water quality | ||
Conductivity(25℃) | 3-6μs/cm | |
Iron rejection rate | 99% (new RO membrane) | |
Organic rejection rate | >99%,when MW>200Balton | |
Particles and bacteria rejection rate | >99% | |
Ultrapure water quality | ||
Resistivity(25℃) | 18.25MΩ/cm | |
Bacteria | <1CFU/ml | |
Particle | >0.22um/ml<1um/ml | |
AC requirement | 110/220V,50/60Hz | |
Dimension(L*W*H-mm) | 410*300*500mm | 410*300*500mm |
Weight(kg) | 20 | 30 |
Standard configuration | main body, pressure tank |